ALL/LATEST SECRET CODES OF NOKIA, SONYERICSSON, MOTOROLA, SAMSUNG, BENQSIEMENS, LG, SAGEM ETC"

ALL/LATEST SECRET CODES OF NOKIA, SONYERICSSON, MOTOROLA, SAMSUNG, BENQSIEMENS, LG, SAGEM ETC
 

ALL NOKIA SECRET CODES
On the main screen type
*#06# for checking the IMEI (International Mobile EquipmentIdentity).
*#7780# reset to factory settings.
*#67705646# This will clear theLCD display(operator logo).
*#0000# To view software version. *#2820# Bluetooth device address. *#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter.
This is available only in the newer devices that supports WLAN like N80#pw+1234567890+1# Shows if sim have restrictions.*#92702689# 

- takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart.Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart If you forgot wallet code for Nokia S60phone, use this code reset:
*# 7370925538# Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345 Press
*#3925538# to delete the contents and code of wallet.
*#7328748263373738# resets security code. 

Default security code is 12345 Unlock service provider: Insert sim, turn phone on and press vol up (arrow keys)for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# Change closed caller group (settings >security settings>usergroups) to 00000 and ure phonewill sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.)Press and hold "0" on the main screen to open wap browser.
 

SONY ERICSSON SECRET CODES
 Sony Ericsson Secret Menu: -> * <- <- * <- * (-> means press joystick, arrow keys or jogdial tothe right and <- means left.) You'll see phone model, software info, IMEI, configuration info, sim lock status, REAL time clock, total calltime and text labels. You can also test your phones services and hardware from this menu (main display, camera, LED/ illumination, Flash LED, keyboard, earphone, speaker, microphone, radio and vibrator tests) IMEI Number: *#06# Lockstatus: <- * * <- Shortcut to last dialed numbers: 0# Shortcutto sim numbers: On main menu type a number and press # If you change the language from default to any other language, then it may be difficult to switchto default language. The shortcut is very simple. Just press < 0000 > . < stands for left arrow button or joystick and > stands for right arrow button or joystick.
 

ALL CHINA PHONE CODES FOR ALL CHINA PHONEs
*#66*# Set Factory
Mode CONFIRMED
*#8375# Show
Software Version
CONFIRMED
*#1234# A2DP ACP
Mode CONFIRMED
*#1234# A2DP INT
Mode CONFIRMED
*#0000# + Send : Set
Default Language
CONFIRMED
*#0007# + Send : Set
Language to Russian
CONFIRMED
*#0033# + Send : Set
Language to French
CONFIRMED
*#0034# + Send : Set
Language to Spanish
CONFIRMED
*#0039# + Send : Set
Language to Italian
CONFIRMED
*#0044# + Send : Set
Language to English
CONFIRMED
*#0049# + Send : Set
Language to German
CONFIRMED
*#0066# + Send : Set
Language to Thai
CONFIRMED
*#0084# + Send : Set
Language to
Vietnamese
CONFIRMED
*#0966# + Send : Set
Language to Arabic
CONFIRMED
More some codes for
reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#
 

CHINESE MODELS:
default user code:
1122, 3344, 1234, 5678
Engineer mode:
*#110*01#
Factory mode:
*#987#
Enable COM port:
*#110*01# -> Device
-> Set UART -> PS
Config ->
 

UART1/115200
Restore factory
settings: *#987*99#
LCD contrast: *#369#
software version:
*#800#
software version:
*#900#
set default language:
*#0000# Send
set English language:
*#0044# Send
set English language
(new firmware):
*#001# Send